Visit us at the f.re.e 2026 in Munich from 18 - 22 February (Hall B4 Stand 518)!
Visit us at the f.re.e 2026 in Munich from 18 - 22 February (Hall B4 Stand 518)!
available from
2.398,00 €
The module is supplied fully assembled.
Are you looking for a CampingBox that is perfectly tailored to your vehicle and therefore makes perfect use of the available space? We manufacture the CampingBox Vario according to your desired dimensions!
Thanks to the numerous fastening options, the box can be easily and securely lashed or screwed into the car. Installation and removal is done in just a few minutes!
The lying surface can be pulled out forwards on a self-supporting basis. This means that no rear seat bench, supports or suspensions are required - the bed floats completely freely thanks to the heavy-duty pull-outs.
For example, the camping box can be used both with and without the rear seat bench folded down. For everyday use with the rear seat bench and for holidays with maximum storage space.
The drawer runs on 200 kg heavy-duty runners with locking mechanism. This means that it can be pulled out easily despite being fully loaded and is automatically locked in both the closed and pulled-out position.
The movable longitudinal and cross dividers allow the drawer to be subdivided as required. Numerous attachment points make it easy to secure the cool box, water tank or power station.
The 120 × 200 cm standard mattress fits in most high-roof camper vans. It can be folded into three sections and, with its 10 cm thick base foam, is sufficient for anyone who doesn't count themselves as a „princess on a pea“.
The comfort mattress is customised to the dimensions of your box. Thanks to the 12 cm thick comfort foam, you'll sleep just like at home. Depending on the dimensions of the box, the mattress can be folded in 2 or 3 ways.
If required, we can also manufacture the CampingBox Vario in the length, width and height of your choice: for example, as a single bed for a high-roof van, across the full width of your van or as a tool transport system for EuroBoxes with an additional bed function.
Full width
Full width
80 cm single bed
60 cm single bed
Full width
We have already adapted the CampingBox for the following vehicles using special adapters:
If required, we can also customise the CampingBox Vario to your desired length, width and height. For example, as a single bed for a high-roof van, across the full width of your van or as a tool transport system for EuroBoxes with an additional bed function.
The following dimensions can be customised (with certain restrictions):
Contact us and we will see together what is possible.
Thanks to the numerous fastening options, the box can be easily and securely lashed or screwed into the car. Installation and removal is done in just a few minutes!
The module is made from 9 or 12 mm thin FSC-certified birch multiplex plywood. Thanks to our patented connection technology, the module is not only lightweight, but can also withstand all the challenges of outdoor life.
We source our wood exclusively from suppliers who practise certified, sustainable forestry (FSC® & PEFC™-certified). We use high-quality hardwood plywood (multiplex) for all products, which is known for its durability, stability and high load-bearing capacity. It is particularly dimensionally stable and resistant, which means that all our products have a very long service life.
The product consists of 99 % wood and metal and is therefore Fully recyclable. We avoid plastic wherever possible and use sustainable, environmentally friendly materials instead.
In the „Natural“ version, the modules are made of untreated birch multiplex in quality B/BB (I/II). This means that the wood is not yet protected against moisture or dirt on delivery.
The benefit is that you can design modules in nature according to your preferences: stain them in your favourite colour, paint or varnish them, stick them on, decorate them with a pencil drawing or simply clear oil them. There are no limits to your creativity.
We therefore recommend ordering the module as a kit when choosing the „Natural“ colour/finish - if available. It's easier to get into all corners on the individual part and you don't have to work around angles, for example. However, it is also possible to treat the fully assembled module.
If we have free capacity, we can treat the wood according to your wishes before assembly. In this case, please contact us for a customised offer.
The following dimensions can be customised (with certain restrictions):
Contact us and we will see together what is possible.
All our modules are available in four colours. The colours are achieved using a robust and waterproof resin coating. The RAL colour specifications are indicative and may differ from a RAL comparison chart.
Black is similar to RAL9004 and satin matt. It looks particularly modern in combination with wooden elements. Soiling and any signs of wear are more visible with black than with the other colours.
Grey is a chic mix for anyone who can't decide between black and white. It goes tone-in-tone with most interior panelling.
White is similar to RAL9001 and is also silk matt. White creates a bright, friendly atmosphere and makes the interior appear larger and airier. Soiling and signs of wear are barely recognisable.
Natur is completely untreated birch plywood. It looks very natural, but is not yet protected from moisture and dirt on delivery. Treating it with oil, varnish or stain gives it your own personal touch.
Scope of delivery of the CampingBox (standard version): BasicBox (bed, drawer) fully assembled.
You can add the optional accessories in the configurator.
Manufacturer: VANFITTERY
is a brand of the company
CzoppikEngineering GmBH
Main street 40
84103 Postau
E-mail: info@vanfittery.de
Responsible person: Tobias Czoppik
Warnings and safety information: Furniture modules & load securing
Load securing: Our modules are regarded as cargo and the vehicle driver is responsible for securing them properly (e.g. with tested lashing straps). Gas cooker
Risk of fire and explosion: Only use the gas cooker on a stable, heat-resistant surface. Cool box & electrical components
Use a suitable power connection: Note whether the appliance is designed for 12V or 230V.
Disclaimer: The use of our products is at your own risk.
Maximum load capacity: Do not exceed the permissible load to avoid material damage or instability.
Danger of crushing: Operate flaps or drawers carefully - danger to fingers and hands.
Humidity: Wooden modules are only resistant to moisture to a limited extent - avoid prolonged exposure to water.
Flammability: Do not place open flames or very hot objects directly on wooden surfaces.
Ensure ventilation: Use only outdoors or with a sufficient supply of fresh air.
Danger of carbon monoxide: Toxic CO can accumulate in closed rooms - CO warning alarms recommended.
Check for leaks: Check for gas odour or leaks before each use.
Gas cartridges: Only use compatible cartridges and store them safely and away from heat.
Check cables and connections: Do not use damaged cables or plugs.
No moisture: Do not expose the cool box and electrical components to direct water.
Avoid overloading: Do not connect several powerful appliances to a single 12V socket.
Observe the vehicle fuse: Ensure that the power supply is suitable for the connected devices.
Please observe all safety instructions and use the products in accordance with the manufacturer's instructions.
Current customer reviews on Google (for all products).
You can read all of our reviews here.
Deutsch Deutsch 
English (UK)
Français
Nederlands
Italiano
Polski
Español
Čeština
Dansk
