Visit us at the f.re.e 2026 in Munich from 18 - 22 February (Hall B4 Stand 518)!
available from
4.390,00 €
The module is supplied fully assembled.
The CampingBox Pro is a compact all-in-one solution for sleeping, sitting, cooking and stowing. With just one module, your vehicle becomes a fully-fledged camper.
The CampingBox Pro combines sleeping, sitting, cooking and storage in one compact module.

The couch offers a cosy seating option for a stay in the van. With just a flick of the wrist, the couch can be transformed into a huge sunbathing area in seconds.

The mechanism is unlocked by gently lifting the handle. With a slight pull forwards, the couch unfolds smoothly and effortlessly on ball bearings to form a bed.

This creates a lying surface of 194 × 120 cm. With the bed extensions, you can extend the lying surface in the rear area to the full width of your van.

The cooker holder, which is specially adapted to our systems, can be attached almost anywhere on all modules.

With the folding tables and the water tank, the rear drawer can be extended into a fully-fledged rear kitchen.

The CampingBox Pro can be installed or removed from the vehicle in under five minutes. The lashing eyes ensure that it is firmly secured without drilling.

The centre flap gives you access to the loading tunnel from the interior: there is space for up to 3 Euroboxes, each measuring a maximum of 30 × 40 × 34 cm, one behind the other.

The two side drawers open towards the interior and can be loaded with 45 kg each. They offer sufficient space for everything that needs to be quickly accessible from the inside.

A particularly practical feature here is that the front box can also be a dry separation toilet: this means you can easily remove the box for use in the interior.

As an alternative to the EuroBoxes, you can load long items such as camping chairs, a yoga mat or your parasol into the loading tunnel.

The beach is 100 metres away? With four EuroBoxes, our lids and the table top, you can set up a small seating area in no time at all.

You can enjoy the most beautiful sunsets on the couch on the tailgate side. In everyday life, it can also be used as a quick storage space, e.g. for bed linen.
Would you like more details? Then take a virtual tour of the box with us!
Tradesman during the week and camper at the weekend? Need to move house quickly? The CampingBox Pro can be installed or removed from the vehicle in under 5 minutes. By attaching it to the lashing eyes, it is not only secured without drilling, but also at the most stable points in the load compartment.
The module is made from 9 or 12 mm thin FSC-certified birch multiplex plywood. Thanks to our patented connection technology, the module is not only lightweight, but can also withstand all the challenges of outdoor life.
We source our wood exclusively from suppliers who practise certified, sustainable forestry (FSC® & PEFC™-certified). We use high-quality hardwood plywood (multiplex) for all products, which is known for its durability, stability and high load-bearing capacity. It is particularly dimensionally stable and resistant, which means that all our products have a very long service life.
The product consists of 99 % wood and metal and is therefore Fully recyclable. We avoid plastic wherever possible and use sustainable, environmentally friendly materials instead.
In the „Natural“ version, the modules are made of untreated birch multiplex in quality B/BB (I/II). This means that the wood is not yet protected against moisture or dirt on delivery.
The benefit is that you can design modules in nature according to your preferences: stain them in your favourite colour, paint or varnish them, stick them on, decorate them with a pencil drawing or simply clear oil them. There are no limits to your creativity.
We therefore recommend ordering the module as a kit when choosing the „Natural“ colour/finish - if available. It's easier to get into all corners on the individual part and you don't have to work around angles, for example. However, it is also possible to treat the fully assembled module.
If we have free capacity, we can treat the wood according to your wishes before assembly. In this case, please contact us for a customised offer.
The CampingBox Pro has a standard lying surface of 194 × 120 cm. With the bed extensions, the lying surface can be extended in the rear 136 cm length to the full width of the van. In a T5 / T6 van, this creates a sleeping area of almost 160 cm wide. The slatted frame is 41 cm above the floor; the seat height is therefore approx. 45 cm, depending on how far you sink into the mattress.
Front drawer
Internal dimensions L × W × H: 41 × 31 × 31 cm
Flat rear pull-out
Internal dimensions L × W × H: 81 × 30.5 × 34 cm incl. partition wall
All our modules are available in four colours. The colours are achieved using a robust and waterproof resin coating. The RAL colour specifications are indicative and may differ from a RAL comparison chart.

Black is similar to RAL9004 and satin matt. It looks particularly modern in combination with wooden elements. Soiling and any signs of wear are more visible with black than with the other colours.

Grey is a chic mix for anyone who can't decide between black and white. It goes tone-in-tone with most interior panelling.

White is similar to RAL9001 and is also silk matt. White creates a bright, friendly atmosphere and makes the interior appear larger and airier. Soiling and signs of wear are barely recognisable.

Natur is completely untreated birch plywood. It looks very natural, but is not yet protected from moisture and dirt on delivery. Treating it with oil, varnish or stain gives it your own personal touch.
Scope of delivery of the CampingBox Pro BasicBox (standard version):
You can add the optional accessories in the configurator.
Manufacturer: VANFITTERY
is a brand of the company
CzoppikEngineering GmBH
Main street 40
84103 Postau
E-mail: info@vanfittery.de
Responsible person: Tobias Czoppik
Warnings and safety information: Furniture modules & load securing
Load securing: Our modules are regarded as cargo and the vehicle driver is responsible for securing them properly (e.g. with tested lashing straps). Gas cooker
Risk of fire and explosion: Only use the gas cooker on a stable, heat-resistant surface. Cool box & electrical components
Use a suitable power connection: Note whether the appliance is designed for 12V or 230V.
Disclaimer: The use of our products is at your own risk.
Maximum load capacity: Do not exceed the permissible load to avoid material damage or instability.
Danger of crushing: Operate flaps or drawers carefully - danger to fingers and hands.
Humidity: Wooden modules are only resistant to moisture to a limited extent - avoid prolonged exposure to water.
Flammability: Do not place open flames or very hot objects directly on wooden surfaces.
Ensure ventilation: Use only outdoors or with a sufficient supply of fresh air.
Danger of carbon monoxide: Toxic CO can accumulate in closed rooms - CO warning alarms recommended.
Check for leaks: Check for gas odour or leaks before each use.
Gas cartridges: Only use compatible cartridges and store them safely and away from heat.
Check cables and connections: Do not use damaged cables or plugs.
No moisture: Do not expose the cool box and electrical components to direct water.
Avoid overloading: Do not connect several powerful appliances to a single 12V socket.
Observe the vehicle fuse: Ensure that the power supply is suitable for the connected devices.
Please observe all safety instructions and use the products in accordance with the manufacturer's instructions.
Current customer reviews on Google (for all products).
You can read all of our reviews here.