Visit us at the f.re.e 2026 in Munich from 18 - 22 February (Hall B4 Stand 518)!
Visit us at the f.re.e 2026 in Munich from 18 - 22 February (Hall B4 Stand 518)!
available from
1.998,00 €
The module is supplied fully assembled.
Experience maximum comfort in your campervan. Our classic - universally suitable for almost all vans (more in the FAQs).
Well thought-out down to the last detail - for more flexibility, comfort and independence when travelling.
During the day, the couch offers cosy seating comfort. In just a few seconds, it can be transformed into a spacious bed with a lying surface of approx. 2 metres.
The 140 cm wide version of the bed system fits perfectly with an IKEA mattress, which is available worldwide in three firmness levels from €90 - an unbeatable price/performance ratio.
With the optional folding table, water tank and cooker holder, the rear drawer becomes a fully-fledged rear kitchen. All accessories are perfectly matched to the bed system.
The Van bed system offers a well thought-out solution for sleeping and storage space in the bus.
Even in vehicles with a short wheelbase, a lying area of around 2 metres in length is created between the tailgate and the front of the kitchen.
The integrated slatted frame saves weight and ensures optimum ventilation of the mattress. The bed thus ensures a light, comfortable sleeping experience.
The bed system is available in two widths: 120 cm and 140 cm. For the 140 cm version, IKEA offers the perfect mattress for little money - even in 3 different firmness levels!
The couch is unlocked by lifting it slightly and can then be moved lengthways on ball bearings. In the foremost position, the backrest can be folded flat with a flick of the wrist; the bed can be set up in seconds.
Thanks to the 5 locking positions, the couch can be adjusted so that you can work comfortably on the kitchen while seated.
In the front position, you have a perfect panoramic view from the couch through the sliding door.
Objects or boxes can be stowed on the tailgate shelf. The rubber band ensures that nothing falls against it when the tailgate is opened.
There is enough space on both sides between the bed and the wheel arch to accommodate long items such as camping chairs, a parasol or a yoga mat.
The drawers are designed to fit classic transport boxes - everything is in view and nothing wobbles. There's even room for a dry separation toilet!
With the optional folding table, the rear front of the rear pull-out is replaced by a bamboo panel. This can simply be folded upwards and used as a table.
The optional gas cooker incl. holder can be hooked in almost anywhere. It can be stowed safely and space-savingly in the drawer.
The drawer with folding table can also be moved when the bed is extended. This means you can slide the table right up to the bed.
The view through the sliding door: the bed system is securely anchored during the journey - either with lashing straps or by bolting it to the vehicle floor.
Perhaps your new favourite place for sunsets....?
You can find a brief introduction to the bed system here.
Take a look at how our modular system performs in real everyday campervan life! In this video, Chris from „Frelsi“ takes you on his trip to Corsica. He intensively tested our „Van“ room concept (combination of „Van bed system“ and „Van kitchen“) for a fortnight.
Every vehicle and every journey is unique. That's why our bed system is not a rigid product, but can be flexibly configured so that you can customise it perfectly to your needs. To give you an overview, you can find a comparison of our storage space options and mattress variants here.
The basis of your bed system is the storage space. This decision determines how you access your equipment and how you organise your vehicle.
| Shelf | Two drawers | Rear extension | |
|---|---|---|---|
 |  |  |
|
| Description of the | A full-length fitted shelf is installed under the bed system. | Two separate drawers (one interior drawer and one rear drawer). | Both drawers merge into one continuous pull-out. |
| Advantages | The shelf is the lightest and cheapest option. Ideal for loading long items. | The drawers are easily accessible from above. The front drawer is accessible from the interior, the rear drawer from the rear. | A full-length, heavy-duty pull-out that is only accessible from the rear. Ideal for large and heavy equipment. |
| EuroBoxes | Suitable for up to 4 large EuroBoxes, with a maximum size of 60 × 40 cm. | Suitable for up to 8 EuroBoxes with a maximum size of 30 × 40 cm (4 per drawer). The large EuroBoxes (60 × 40 cm) fit not in this variant. | Suitable for up to 4 large EuroBoxes, with a maximum size of 60 × 40 cm. |
| Load capacity | - | 100 kg per drawer | 200 kg (total extract) |
| Weight | approx. 42kg (without accessories) | approx. 61kg (without accessories, no folding table) | approx. 65kg (without accessories, no folding table) |
| Extension to the rear kitchen | ❌ Not compatible | ✔ Matching accessories available | ✔ Matching accessories available |
| Folding table | ❌ Not compatible | ✔ Selectable in the configurator | ✔ Selectable in the configurator |
| Cooker holder | ❌ Not compatible | ✔ Selectable in the configurator | ✔ Selectable in the configurator |
| Compressor cooler | ❌ No extract available | ✔ Selectable in the configurator | ✔ Selectable in the configurator |
A good night's sleep is priceless when travelling. The decision is up to you: do you bring your own mattress, choose the inexpensive IKEA mattress or treat yourself to the maximum comfort of our customised cold foam mattress?
| No mattress | IKEA mattress | Comfort mattress | |
|---|---|---|---|
 |  |  |
|
| Description of the | You get your own mattress and stay as flexible as possible. | The inexpensive and globally available solution from IKEA. | The customised premium solution for a perfect fit and maximum sleeping comfort. |
| Fit | Depending on your chosen mattress. | Rectangular, 3-part folding mattress. The mattress is only available in the standard width (140 cm), which means that the mattress is compressed along the contours of the vehicle. | Perfectly customised to the interior contours of your vehicle, individually commissioned by us. |
| Price | Depending on your chosen mattress. | Available from IKEA from approx. 100 €. | See configurator for price. |
The bed is basically universal and therefore fits into any standard van - or it can be made to fit very easily!
It is important that there is a flat surface of at least 100 x 192 cm in the vehicle. Unfortunately, the bed cannot be folded over the rear seat bench when it is folded down. CampingBox Vario in question.
Up to 20 cm can be cut away at any point on each side of the bed (for the 140 cm wide version). This means that the bed can be easily adapted to the vehicle or the interior panelling in places such as the tailgate opening. Off-centre positioning is also possible without any problems.
We offer customisation to the vehicle in the form of “fitting“ for most vehicles ex works - simply select your vehicle model in the last step of the configurator.
If your model is not listed, contact us. Customisation for vehicles not listed or special cases is also easily possible using a jigsaw!
On fastest, safest and easiest is when the bed in the vehicle via lashing straps on the original load securing eyelets is attached. Why? The lashing eyes are usually bolted directly to the vehicle body and are designed to secure loads in the vehicle. Lashing straps are also designed to secure loads and the corresponding attachment points on the bed are also located at the most stable points. The matching lashing straps (4 pcs.) are already included in the scope of delivery.
However, you can also screw the bed system to the wooden floor or to the rail system, for example. We recommend connecting the side walls of the module to stable points in the vehicle using 4 (metal) brackets.
No, no special floor plate is required. It is secured using existing lashing points, which every vehicle has.
The 140 cm wide version is exactly IKEA mattress customised. You can get the right mattress at any time, anywhere in the world and in 3 different quality levels/degrees of firmness. At the same time, this mattress has an unbeatable price-performance ratio with a price starting at 100 euros.
Alternatively you can always for our Customised comfort mattress decide. It consists of a 12 cm thick cold foam and has a removable and washable cover. The comfort mattress is also precisely matched to the fitting of the bed and therefore 100% perfectly adapted to the interior contours of your vehicle.
With the 120 cm wide version we have a suitable Base mattress. It is rectangular, divided into 3 sections and made of 10 cm thick foam. The cover is grey, removable and washable.
Alternatively, you can of course also use your own mattress or make one yourself (or have one made).
Yes, you only need to loosen one screw from the backrest mechanism to be able to fold the backrest forwards.
Yes, a tank can easily be integrated into the rear drawer. You can simply look for a suitable water tank based on the dimensions of the drawers - the exact dimensions can be found below in the technical information.
The drawer can also be customised: For example, you can drill a hole in the side wall for the water tank outlet.
Alternatively, the Boxio modules also fit perfectly into the drawers; the „Boxio Wash“ in particular offers a good solution here.
The module is made from 9 or 12 mm thin FSC-certified birch multiplex plywood. Thanks to our patented connection technology, the module is not only lightweight, but can also withstand all the challenges of outdoor life.
We source our wood exclusively from suppliers who practise certified, sustainable forestry (FSC® & PEFC™-certified). We use high-quality hardwood plywood (multiplex) for all products, which is known for its durability, stability and high load-bearing capacity. It is particularly dimensionally stable and resistant, which means that all our products have a very long service life.
The product consists of 99 % wood and metal and is therefore Fully recyclable. We avoid plastic wherever possible and use sustainable, environmentally friendly materials instead.
In the „Natural“ version, the modules are made of untreated birch multiplex in quality B/BB (I/II). This means that the wood is not yet protected against moisture or dirt on delivery.
The benefit is that you can design modules in nature according to your preferences: stain them in your favourite colour, paint or varnish them, stick them on, decorate them with a pencil drawing or simply clear oil them. There are no limits to your creativity.
If we have free capacity, we can treat the wood according to your wishes before assembly. In this case, please contact us for a customised offer.
We offer the bed in 120 and 140 cm widths as standard. However, the bed can be shortened to a width of up to 100 cm using the so-called „sacrificial surfaces“ - even in places! The approx. 100 cm wide body fits between the wheel arches of virtually any vehicle.
The length of the base frame is 189 cm. The mattress can protrude a little at the front and back, creating a lying surface of up to 200 cm.
In a short VW bus, you can achieve a bed length of 200 cm (tailgate panelling to kitchen) even with the kitchen installed. The bed can also be folded out as standard at a length of 182 cm.
Can't find the right size? Write us a message!
Fitted shelf:
The external dimensions of the shelf are 126 cm × 87.5 cm. The surfaces are designed to fit Euroboxes.
Two-drawer„ variant:
The drawers have an internal surface area of 60.5 × 40.5 cm × 25 cm per compartment (i.e. 2x per drawer), the usable height at the back (with the folding table) is 33.5 cm, at the front 31 cm. If the partition is removed, the drawers have a base area of 60.5 × 81.5 cm.
Rear extension„ variant:
The rear pull-out has an internal surface area of 124 cm × 81.5 cm × 22.5 cm. The usable height is 33.5 cm.
* Usable height is higher than the thrust
* Usable height is higher than the thrust
The weight of the bed system depends on the selected configuration. The following weight specifications refer to the bed system in the 140 cm wide version:
Depending on the accessories selected (folding table, cooker holder, compressor cool box), the bed system will be a little heavier.
All our modules are available in four colours. The colours are achieved using a robust and waterproof resin coating. The RAL colour specifications are indicative and may differ from a RAL comparison chart.
Black is similar to RAL9004 and satin matt. It looks particularly modern in combination with wooden elements. Soiling and any signs of wear are more visible with black than with the other colours.
Grey is a chic mix for anyone who can't decide between black and white. It goes tone-in-tone with most interior panelling.
White is similar to RAL9001 and is also silk matt. White creates a bright, friendly atmosphere and makes the interior appear larger and airier. Soiling and signs of wear are barely recognisable.
Natur is completely untreated birch plywood. It looks very natural, but is not yet protected from moisture and dirt on delivery. Treating it with oil, varnish or stain gives it your own personal touch.
In the standard version, the bed is rectangular, comes with 2 drawers, without folding table, with adjustable backrest and 5-way length-adjustable couch. You can add the optional accessories in the configurator.
Manufacturer: VANFITTERY
is a brand of the company
CzoppikEngineering GmbH
Main street 40
84103 Postau
E-mail: info@vanfittery.de
Responsible person: Tobias Czoppik
Warnings and safety information: Furniture modules & load securing
Installation instructions: Installation requires basic DIY skills and the right tools. We recommend carrying out the installation at your own pace and, ideally, with a partner. If you are unsure or have no experience of vehicle conversions, we advise having the installation carried out by a specialist firm. Gas cooker
Risk of fire and explosion: Only use the gas cooker on a stable, heat-resistant surface. Cool box & electrical components
Use a suitable power connection: Note whether the appliance is designed for 12V or 230V.
Disclaimer: The use of our products is at your own risk.
Load securing: Our modules are regarded as cargo and the vehicle driver is responsible for securing them properly (e.g. with tested lashing straps).
Maximum load capacity: Do not exceed the permissible load to avoid material damage or instability.
Danger of crushing: Operate flaps or drawers carefully - danger to fingers and hands.
Humidity: Wooden modules are only resistant to moisture to a limited extent - avoid prolonged exposure to water.
Flammability: Do not place open flames or very hot objects directly on wooden surfaces.
Ensure ventilation: Use only outdoors or with a sufficient supply of fresh air.
Danger of carbon monoxide: Toxic CO can accumulate in closed rooms - CO warning alarms recommended.
Check for leaks: Check for gas odour or leaks before each use.
Gas cartridges: Only use compatible cartridges and store them safely and away from heat.
Check cables and connections: Do not use damaged cables or plugs.
No moisture: Do not expose the cool box and electrical components to direct water.
Avoid overloading: Do not connect several powerful appliances to a single 12V socket.
Observe the vehicle fuse: Ensure that the power supply is suitable for the connected devices.
Please observe all safety instructions and use the products in accordance with the manufacturer's instructions.
Current customer reviews on Google (for all products).
You can read all of our reviews here.
Deutsch Deutsch 
English (UK)
Français
Nederlands
Italiano
Polski
Español
Čeština
Dansk
Svenska
Suomi
