Visit us at the f.re.e 2026 in Munich from 18 - 22 February (Hall B4 Stand 518)!
ab 398,00 €
Precisely fitting system base plate for conversions, camping modules and rear pull-outs – whilst retaining full functionality of the original rail system.
Replace the uneven boot floor of your Peugeot Traveller L2 (standard length, from model year 2016) on a stable, level surface. Our two-component system has been specially developed to allow camping modules, rear pull-outs or furniture units to be securely positioned inside the vehicle without compromising the flexibility of the original seat rails.
Our floor panel for PSA Group vehicles consists of 2 parts.
The Filler panel equalises the uneven floor and brings the original carpet to the same height as the rails. This means that modules can be placed on a flat surface and the original rail system can still be used. It consists of a 12 mm thick birch multiplex board.
Please note: due to the long, narrow wooden strips between the rails and panelling, the filler panel may not lie 100% flat on the floor or the distance to the outer rail may not be 100% constant - this is not possible otherwise due to the principle.
The Cover plate lies above the rails and thus turns the load compartment into a Completely closed and flat surface. It consists of a 9 mm thick birch multiplex board.
Both panels can be screwed together to form a single unit.
As the floor plate is not bolted to the vehicle, we recommend attaching modules to the original seat rails using adapters/grooved nuts.
All models are based on a waterproof, glued birch plywood panel. You can choose from the following three finishes:
Natural (untreated):
The panel is supplied without any surface treatment. Important note: To provide the wood with long-lasting protection against damp and dirt, it is essential that you treat the panel yourself before installation (e.g. with oil, wood stain or varnish).
Black (smooth phenolic resin coating):
Finished with a smooth, jet-black phenolic resin coating (similar to RAL 9005). The panel is completely waterproof. Thanks to its mirror-smooth surface, this version is ideal as a base onto which, for example, you can stick your own choice of floor covering (PVC, vinyl, etc.) using double-sided adhesive tape. Please note: The smooth surface is more susceptible to minor surface scratches.
Screen printing:
Classic van interior finish with a rough, non-slip texture (as is also used on lorry and trailer floors). Extremely hard-wearing and durable. Siebdruck is a functional material and is not of furniture quality. The raw material may already exhibit minor imperfections, slight scratches or streaks when supplied by the manufacturer. The colour is not jet black, but has a reddish-brownish tinge.
⚠️ Important information on fit and use
Manufacturer: VANFITTERY
is a brand of the company
CzoppikEngineering GmBH
Main street 40
84103 Postau
E-mail: info@vanfittery.de
Responsible person: Tobias Czoppik
Warnings and safety information: Furniture modules & load securing Load securing: Our modules are regarded as cargo and the vehicle driver is responsible for securing them properly (e.g. with tested lashing straps). Gas cooker Risk of fire and explosion: Only use the gas cooker on a stable, heat-resistant surface. Cool box & electrical components Use a suitable power connection: Note whether the appliance is designed for 12V or 230V. Disclaimer: The use of our products is at your own risk.
Maximum load capacity: Do not exceed the permissible load to avoid material damage or instability.
Danger of crushing: Operate flaps or drawers carefully - danger to fingers and hands.
Humidity: Wooden modules are only resistant to moisture to a limited extent - avoid prolonged exposure to water.
Flammability: Do not place open flames or very hot objects directly on wooden surfaces.
Ensure ventilation: Use only outdoors or with a sufficient supply of fresh air.
Danger of carbon monoxide: Toxic CO can accumulate in closed rooms - CO warning alarms recommended.
Check for leaks: Check for gas odour or leaks before each use.
Gas cartridges: Only use compatible cartridges and store them safely and away from heat.
Check cables and connections: Do not use damaged cables or plugs.
No moisture: Do not expose the cool box and electrical components to direct water.
Avoid overloading: Do not connect several powerful appliances to a single 12V socket.
Observe the vehicle fuse: Ensure that the power supply is suitable for the connected devices.
Please observe all safety instructions and use the products in accordance with the manufacturer's instructions.

298,00 €
Incl. VAT, plus shipping
149,00 €
Incl. VAT, plus shipping
299,00 €
Incl. VAT, plus shipping
ab 249,00 €
Incl. VAT, plus shippingCurrent customer reviews on Google (for all products).
You can read all of our reviews here.